🌬️ 16.4 FT Door &
Window Weather Stripping
Couldn't load pickup availability
16.4Ft Door Weather Stripping
🌬️ Door Closed. Still Feeling a Draft?
Even when a door or window is fully closed, small gaps around the edges can still let unwanted air and dust inside.
This self-adhesive door and window seal helps cover suitable gaps without drilling, screws or bulky hardware.
🥶 Feel the Difference at the Gap
A small opening beneath a closed door can still allow unwanted airflow to pass through.
An exposed gap leaves room for unwanted air to pass through.
The flexible flap extends across the opening to create a barrier.
🚪 Cover the Gap. Help Block the Draft.
The adhesive backing attaches to a suitable smooth surface, while the flexible clear flap extends across the remaining opening.
Self-Adhesive Backing
Attaches to a clean, smooth and completely dry surface.
Flexible Clear Flap
Extends over the opening to help reduce unwanted airflow.
👌 Peel. Press. Seal.
No drilling. No screws. Just a few simple steps.
Wipe the surface clean and make sure it is completely dry.
Measure the area and cut the strip to the length you need.
Remove the protective backing from the adhesive section.
Align the strip and press the adhesive edge firmly into place.
📏 Choose the Right Size for Your Gap
First, measure the length of the area you want to seal. Then measure the gap opening to choose the appropriate width.
Total width: 25 mm
Adhesive backing: 10 mm
Total width: 35 mm
Adhesive backing: 15 mm
Total width: 45 mm
Adhesive backing: 17 mm
💡 Our Recommendation: 35MM
A versatile choice for gaps up to 20 mm. If your gap is wider than 20 mm but no more than 30 mm, choose the 45MM size.
Make sure the flexible flap can fully cover the opening while leaving enough adhesive backing attached securely to the surface.
✨ Flexible, Clear & Low-Profile
Cover the gap without adding a bulky-looking strip to your door or window.
The thin, flexible flap bends naturally, and its transparent appearance helps it blend more discreetly into many door and window frames.
🧹 Help Keep More Dust Outside
Drafts aren't the only thing that can pass through an exposed gap.
Covering suitable openings beneath doors and around frames can also help reduce the amount of outdoor dust and small debris entering through those spaces.
🏠 One Simple Fix. Multiple Places to Use It.
Small gaps can appear in different places around your home. Use the strip where the surface and opening are suitable.
For sliding doors, apply it only to a suitable smooth edge where the strip will not interfere with normal opening or closing.
Measure the area, choose the right width, trim the strip to length, then peel and press it into place.
❓ Frequently Asked Questions
It is designed for suitable gaps around doors, windows and other clean, smooth surfaces where the adhesive can bond properly.
Measure the gap before ordering. Choose 25MM for gaps up to 15 mm, 35MM for gaps up to 20 mm, or 45MM for gaps up to 30 mm. If your gap exceeds 30 mm, this product may not be suitable.
Each roll is 16.4 ft long. Measure the area you want to cover to estimate how many rolls you need.
No. The strip uses a self-adhesive backing. You may need scissors to trim it to the required length.
Yes. Measure the area first, then cut the strip to the required length before installation.
For better adhesion, apply it to a clean, smooth and completely dry surface. Rough, dusty, damp or uneven surfaces may reduce adhesive performance.
It is designed to help reduce airflow through suitable gaps. Results can vary depending on the gap size, surface condition and installation.
Only use it on a suitable edge where the strip will not obstruct the door's movement. Check the placement carefully before pressing the adhesive backing firmly into place.
🏡 Close the Gap Without the Complicated Fix
No drilling. No screws. No bulky hardware.
Measure. Cut. Peel. Press.
Choose the right size for your gap and help reduce unwanted drafts and outdoor dust around suitable doors and windows.
